ISO 9001:2015 certified

CSWIP 3.0 Visual Welding Inspector in Madurai

Preparatory training and examination at the BlastCorr India centre in Madurai, Tamil Nadu.

Popular
Welder in a protective helmet working on metal with sparks flying

Course overview

The CSWIP 3.0 Visual Welding Inspector course provides entry-level welding inspectors, quality controllers, and fabrication technicians with the essential skills to perform visual examinations and dimensional checks on fusion-welded joints. Aligned with BS EN ISO 17637 and CSWIP-WI-6-92 requirements, this program equips candidates to carry out post-weld inspection independently and support pre-weld and in-process surveillance under the supervision of qualified Senior/Welding Inspectors.

Who this course is for

✓Welders, fabricators and supervisors moving into welding inspection
✓QA/QC engineers and inspectors on fabrication, pipeline and construction projects
✓Inspectors who need an internationally recognised welding inspector certificate

Certification body / scheme

✓CSWIP (BS EN ISO 17637 / CSWIP-WI-6-92)

Eligibility and entry requirements

✓Recommended Experience: A minimum of 6 months’ welding-related engineering experience and 2 years of industrial experience is recommended.
✓Mature Candidate Route: Candidates with at least 10 years of recent, continuous, independently verified visual welding inspection experience under qualified supervision can apply for direct examination exemption from formal training.
✓Health & Eyesight: Valid proof of near visual acuity (Times Roman N5 or Jaeger No. 1 at not less than 30 cm) tested within the last 12 months.

Training requirements

Typical course duration:

✓2 to 3 days classroom & practical workshop
✓1 day examination

Certification requirements

Examination format (practical only – 70% pass mark per section):

✓Practical Part A1: Visual inspection and assessment of 8 examination specimens against a code (90 minutes)
✓Practical Part B1: Visual inspection of a T-joint fillet weld specimen (30 minutes)

Syllabus

Based on Appendix 1 (Clause 1.2) of the CSWIP scheme.

01Codes and Application StandardsMake-up and usage of standard welding fabrication codes.
02Welding Terminology & DefectologyWelds, joints, weld face, toe, root, excess weld metal, heat-affected zone (HAZ), fusion boundary, and defect classifications.
03Parent Materials Inspection PointsMaterial thickness, lengths, diameters, grade/composition verification against documentation, surface cleanliness, heat treatment condition, and distortion.
04Welding ProcessesFundamental features of manual and mechanised arc welding processes; identification of process-induced imperfections.
05Consumables ManagementIdentification to British, European, ISO, and AWS standards; coating types, fluxes, shielding gases; drying, baking, and storage procedures.
06Visual & Dimensional CheckingEdge preparations, root gaps, fit-up, dimensional profiles of completed welds, and tolerance verification.
07Preheat & In-Process ControlsApplication and control of preheat, interpass temperatures, and heat treatment monitoring.
08Health & SafetyWorkshop and site safety practices in welding operations.
09Weld Repairs InspectionInspection and reporting of partially gouged and ground repairs.

Career & job opportunities

Acquiring the CSWIP 3.0 credential qualifies you for foundational Quality Assurance and Quality Control roles across major engineering sectors:

Target RolesVisual Welding Inspector (VWI), QA/QC Trainee Inspector, Fabrication Shop Inspector, Mechanical QC Assistant.
Hiring IndustriesStructural steel fabrication, pressure vessel workshops, pipeline construction, shipbuilding, automotive manufacturing, and plant maintenance.
Career PathwayDirect advancement to CSWIP 3.1 Welding Inspector after gaining the required field experience.

Upcoming CSWIP 3.0 Visual Welding Inspector dates

No scheduled batches published yet — enquire for the next available date.

Duration, exam and fees

Each batch runs preparatory classes, a practical session and the examination. Contact admissions for the dates of the next batch.

Fees depend on the batch and the examination body's charges. Admissions confirm the current fee and what it includes when you enquire.

Frequently asked questions

Where is the CSWIP 3.0 Visual Welding Inspector course held?

Preparatory classes and the exam are held at the BlastCorr India centre, No. 146, First floor, NSK Street, Nethaji Road, Bypass Rd, Nehru Nagar, Madurai 625016, Tamil Nadu. Accommodation is available on the ground floor of the same building.

Who can apply for CSWIP 3.0 Visual Welding Inspector?

Entry requirements: Recommended Experience: A minimum of 6 months’ welding-related engineering experience and 2 years of industrial experience is recommended.; Mature Candidate Route: Candidates with at least 10 years of recent, continuous, independently verified visual welding inspection experience under qualified supervision can apply for direct examination exemption from formal training.; Health & Eyesight: Valid proof of near visual acuity (Times Roman N5 or Jaeger No. 1 at not less than 30 cm) tested within the last 12 months..

Which body issues the certificate?

CSWIP (BS EN ISO 17637 / CSWIP-WI-6-92).

When is the next CSWIP 3.0 Visual Welding Inspector intake?

No batch is scheduled right now. Contact admissions for the next available date.

What is the fee for CSWIP 3.0 Visual Welding Inspector?

Fees depend on the batch and the examination body. Admissions confirm the current fee when you enquire, by phone, WhatsApp or the Apply form.

How do I apply?

Fill in the Apply form on this site, or send your CV on WhatsApp to +91 89033 30890. Admissions reply within one working day.

Ready to join the next CSWIP 3.0 Visual Welding Inspector batch?Send your details and admissions will confirm eligibility, dates and fees.
Apply now