BGAS-CSWIP Painting Inspector Grade 1 (Offshore) in Madurai

Name: BlastCorr India Private Limited
Address: No. 146, First floor, NSK Street, Nethaji Road, Bypass Rd, Nehru Nagar, Madurai, Tamil Nadu, 625016, IN
Telephone: +91 89033 30890
Rating: 4.9

Preparatory training and examination at the BlastCorr India centre in Madurai, Tamil Nadu.

Corroded pipework and valves on an industrial site

Course overview

The BGAS-CSWIP Painting Inspector Grade 1 qualification is the advanced level in the BGAS coating inspection scheme, placing specialized emphasis on harsh marine and offshore environments. This certification qualifies inspectors to manage complex coating projects, oversee splash-zone protection, evaluate specialized offshore paint systems, and coordinate teams of Grade 2 inspectors on offshore platforms, FPSOs, subsea pipeline shore crossings, and marine facilities. Key Responsibilities of a Grade 1 Inspector • Acting in support of the Project Engineer on all technical matters relating to paint and painting inspection, with specific expertise in offshore structures and splash zones. • Coordinating and supervising the work of BGAS Painting Inspectors Grade 2, ensuring access to and adherence to applicable codes, client specifications, and safe procedures. • Overseeing full compliance with environmental legislation, non-destructive coating assessments, and hazardous waste containment offshore. • Maintaining comprehensive QA/QC inspection dossiers and signing off final compliance documentation.

Who this course is for

✓Painters, blasters and coating supervisors moving into inspection

✓QA/QC engineers working on protective coating projects in oil and gas, marine and infrastructure

✓Inspectors who need an internationally recognised painting inspector certificate

Certification body / scheme

✓BGAS-CSWIP

Eligibility and entry requirements

✓Prerequisite Certification: Candidates must hold a valid BGAS-CSWIP Painting Inspector Grade 2 certificate.

✓Industrial Experience: A minimum of 12 months of authenticated experience in painting inspection duties.

✓Approved Training: Completion of an approved BGAS Painting Inspector Grade 1 training course prior to taking the examination.

✓Near visual acuity: Jaeger No. 1 or Times Roman N4.5 (letters at least 1.6 mm high at a distance of not less than 30 cm).

✓Satisfactory colour vision verified by the Ishihara 24 plate test within the previous 12 months.

Training requirements

Course duration:

✓4 days classroom/laboratory course

✓1 day examination (5 days total)

Certification requirements

Examination format (70% pass mark required per paper):

✓Paper 1 (General Theory): 50 multiple-choice questions focusing on offshore painting specifications, paint chemistry, standards, and safety (75 minutes)

✓Paper 2 (Practical Examination): 50 multiple-choice questions based on practical scenarios, offshore inspection instrumentation, surface cleanliness standards, and data interpretation (75 minutes)

Certification is valid for 5 years, renewable through documented evidence of continuous work activity and annual eyesight certification.

Syllabus

Based on Appendix A, Section A12 (Paint Inspector Grade 1).

Advanced Theoretical Modules

01Offshore & Marine Coating SystemsPaint systems designed for aggressive C5-M (marine/offshore) and CX (extreme offshore) corrosive environments; multi-coat epoxy systems, polyurethanes, thermal spray aluminium (TSA), and specialized glass flake vinyl esters.

02Offshore Specifications & StandardsIn-depth evaluation and verification of National Grid specifications T/SP/PA/9, T/SP/PA/10, ISO 12944 (Parts 1–9 for offshore/marine structures), and NORSOK M-501.

03Offshore HSE & ContainmentRig safety, marine environmental protection, hazardous air pollutants (HAPs), VOC regulations, over-water blasting containment, and toxic waste disposal at sea.

04Supervisory & Team CoordinationRoles in coordinating Grade 2 inspectors, organizing shift surveillance, verifying daily logs, resolving quality non-conformances (NCR), and liaising with client representatives.

Advanced Practical & Quality Auditing Modules

05Complex Substrates & Surface PreparationsSurface profile auditing, high-pressure water jetting (hydro blasting), grit recovery systems, and dealing with salt-encrusted marine steel substrates.

06Advanced Instrument VerificationsCalibration and verification of electronic psychrometers, surface profile gauges, surface temperature data-loggers, high-voltage spark testers (sponge and holiday detectors), and automatic adhesion testers.

07Failure Analysis & RectificationRoot-cause analysis of offshore coating failures (osmotic blistering, under-film corrosion, inter-coat delamination, chalking, cracking) and formulating approved repair procedures.

08QA/QC Record AuditingReviewing paint manufacturer test certificates, technical data sheets (TDS), safety data sheets (SDS), and maintaining full audit trails for asset owners.

Career & job opportunities

Achieving Grade 1 certification elevates an inspector to top-tier technical and supervisory positions within the international energy and maritime sectors:

Target RolesOffshore Painting Inspector, Lead Coating QC Inspector, Senior QA/QC Coating Engineer, Client Representative (Offshore Facilities), Marine Corrosion Consultant, Painting Inspection Supervisor.

Key IndustriesOffshore oil and gas platforms, FPSO / FLNG vessels, offshore wind turbine foundations (monopiles, jackets), subsea installations, marine loading terminals, international EPC projects.

Upcoming BGAS-CSWIP Painting Inspector Grade 1 (Offshore) dates

Preparatory	Practical	Exam date	Venue
26-Apr-27 – 28-Apr-27	29-Apr-27	2-May-27	Madurai
17-May-27 – 19-May-27	20-May-27	28-May-27	Madurai
14-Jun-27 – 16-Jun-27	17-Jun-27	22-Jun-27	Madurai

Duration, exam and fees

Each batch runs preparatory classes, a practical session and the examination. For the next batch that means classes from 26-Apr-27 to 28-Apr-27, the practical on 29-Apr-27 and the exam on 2-May-27.

Fees depend on the batch and the examination body's charges. Admissions confirm the current fee and what it includes when you enquire.

Frequently asked questions

Where is the BGAS-CSWIP Painting Inspector Grade 1 (Offshore) course held?

Preparatory classes and the exam are held at the BlastCorr India centre, No. 146, First floor, NSK Street, Nethaji Road, Bypass Rd, Nehru Nagar, Madurai 625016, Tamil Nadu. Accommodation is available on the ground floor of the same building.

Who can apply for BGAS-CSWIP Painting Inspector Grade 1 (Offshore)?

Entry requirements: Prerequisite Certification: Candidates must hold a valid BGAS-CSWIP Painting Inspector Grade 2 certificate.; Industrial Experience: A minimum of 12 months of authenticated experience in painting inspection duties.; Approved Training: Completion of an approved BGAS Painting Inspector Grade 1 training course prior to taking the examination.; Near visual acuity: Jaeger No. 1 or Times Roman N4.5 (letters at least 1.6 mm high at a distance of not less than 30 cm).; Satisfactory colour vision verified by the Ishihara 24 plate test within the previous 12 months..

Which body issues the certificate?

BGAS-CSWIP.

When is the next BGAS-CSWIP Painting Inspector Grade 1 (Offshore) intake?

The next batch starts preparatory classes on 26-Apr-27, with the exam on 2-May-27 in Madurai. All dates are on the exam calendar.

What is the fee for BGAS-CSWIP Painting Inspector Grade 1 (Offshore)?

Fees depend on the batch and the examination body. Admissions confirm the current fee when you enquire, by phone, WhatsApp or the Apply form.

How do I apply?

Fill in the Apply form on this site, or send your CV on WhatsApp to +91 89033 30890. Admissions reply within one working day.

Ready to join the next BGAS-CSWIP Painting Inspector Grade 1 (Offshore) batch?Send your details and admissions will confirm eligibility, dates and fees.

Apply now